Automatic Injectable Dry Powder Filling with Rubber Stoppering Machine

Content awaited.

Model No. NKPF - 300SP
Direction Left to Right
Production Rate Up to 240 Fills/Min. for 10 ml. Vial
Fill Capacity 50 Mg to 1.5 Grms. single dose (with help of
change parts), 1.5 Grms to infinite number of
doses. Fill range depending upon vial opening
and bulk density of powder.
Accuracy ± 1% depending upon consistency and the
uniformity of bulk density of injectable powder
under controlled level of humidity (i.e. 25%).
Electrical Supply 20 HP
Power Requirement 415 Volts, 3 Phase (4 Wire System), 50 Hz.
Air Requirement 6 Kg/Cm2
Height of Conveyor Adjustable from 900 to 950 MM
Dimensions 4380 MM (L) x 1400 MM (W) x 2600 MM (H)
Net Weight 1250 Kgs. (Approx)
Gross Weight 1450 Kgs. (Approx)
Fill sizes 50 mg. to 6 grms
Vial Sizes 5 ml. to 100 ml.
Rubber Stopper Sizes 20 mm, 28 mm & 32 mm

Content awaited.

Content awaited.

Content awaited.

Content awaited.

Dry Powder Filling Machine - Injectable Dry Powder Filler with Rubber Stoppering Machine

NKP Pharma Pvt. Ltd. brings to you NKPF - 300SP, automatic injectable dry powder filling with rubber stoppering machine that has a production rate of up to 240 fills/min for 10ml vial. It requires 20 HP of electric supply to operate. An accuracy of 1% makes it a very important and an effective piece of machinery for pharmaceutical applications. The dry powder filling machine accommodates vial sizes ranging between 5 ml to 100 ml.

An air requirement of 6kg/cm2 is required for the smooth operation of the machine that has a fill capacity between 50 mg to 1.5 gm for single dose by changing the parts. The rubber stoppering mechanism protects the vial from getting contaminated by placing stoppers on top of it. The stopper size that comes within the permissible range of the machine is 20mm, 28mm, & 32mm.