|Model No.||NKPF - 300DP|
|Direction||Left to Right|
|Production Rate||Up to 240 Fills /Min. for single dose.
Up to 120 Fills /Min. for double dose.
Up to 80 Fills /Min. for triple dose.
Up to 60 Fills /Min. for four dose.
|Fill Capacity||50 Mg to 1.5 Grms. single dose (with help of
change parts), 1.5 Grms to 6 Grms. double, triple
and four dose. Fill range depending upon vial
opening and bulk density of powder.
|Accuracy||±1% depending upon consistency and the
uniformity of bulk density of injectable powder
under controlled level of Humidity (i.e. 25%).
|Electrical Supply||17 HP|
|Power Requirement||415 Volts, 3 Phase (4 Wire System), 50 Hz.|
|Air Requirement||6 Kg/Cm2|
|Height of Conveyor||Adjustable from 900 to 950 MM|
|Dimensions||5460 MM (L) x 1410 MM (W) x 2973 MM (H)|
|Net Weight||2100 Kgs. (Approx)|
|Gross Weight||3200 Kgs. (Approx)|
|Fill sizes||50 mg. to 6 grms|
|Vial Sizes||5 ml. to 100 ml.|
|Rubber Stopper Sizes||20 mm, 28 mm & 32 mm|
NKPF – 300DP- Automatic injectable dry powder filling machine with rubber stoppering has a provision of open RABs. Restricted Access Barrier systems or RABs makes sure that there is a permanent expulsion of microorganisms and particulate matter from the working area. This makes sure that the entire operation remains safe and clean, free from any adulterations. Cleanliness is of utmost importance for any pharmaceutical application and hence this machine is tailor made to meet this need.
The powder filling machine with rubber capping can accommodate rubber stopper of different sizes- 20mm, 28mm, and 32 mm. The injectable powder filling machine has a good working efficiency with production rate reaching up to 240 fills/min for a single dose. It thus makes it very effective machinery as it can be used for up to four dose. The powder filler and capper is an absolute value for money machine as it has the ability to be used for a prolonged period.