Automatic Injectable Dry Powder Filling with Rubber Stoppering Machine

Content awaited.

Model No. NKPF - 300DP
Direction Left to Right
Production Rate Up to 240 Fills /Min. for single dose.
Up to 120 Fills /Min. for double dose.
Up to 80 Fills /Min. for triple dose.
Up to 60 Fills /Min. for four dose.
Fill Capacity 50 Mg to 1.5 Grms. single dose (with change
parts).1.5 Grms. to 6 Grms. double, triple and four
dose. Fill range depending upon vial opening
and bulk density of powder.
Accuracy ±1% depending upon consistency and the
uniformity of bulk density of injectable powder
under controlled level of Humidity (i.e. 25%).
Electrical Supply 10 HP
Power Requirement 415 Volts, 3 Phase (4 Wire System), 50 Hz.
Air Requirement 6 Kg/Cm2
Height of Conveyor Adjustable from 900 to 950 MM
Dimensions 4380 MM (L) x 1310 MM (W) x 2430 MM (H)
Net Weight 1250 Kgs. (Approx)
Gross Weight 1450 Kgs. (Approx)
Fill sizes 50 mg. to 6 grms
Vial Sizes 5 ml. to 100 ml.
Rubber Stopper Sizes 20 mm, 28 mm & 32 mm

Content awaited.

Content awaited.

Content awaited.

Content awaited.

Injectable Dry Powder Filling with Rubber Stoppering Machine

NKP Pharma Pvt. Ltd. offers NKPF- 300DP, an automatic injectable dry powder filling machine having rubber stoppering, to cater to the needs of different pharmaceutical industries that require vials filled up with suitable content. These vials filled up with formulations are required in several medical situations to be used as a cure. The dry powder filler also places rubber stopper on the head of the vials to prevent them from getting damaged or contaminated.

The direction of operation of this machine is from left to right and it requires an electric supply of 10 HP. Vial size ranges from 5 ml to 100 ml, thus making it competent to serve a wide range of products. The powder filling machine has very good workability and it assures of giving satisfactory performance. The high durability of the machine makes it capable of performing long operations without experiencing any technical breakdown.